• Samrt but poweful making a big difference
• 7 modes to fully meet a variety of clinical needs
• Uniform beam,strong penetrability
• Less light loss
• Light intensity up to 3000 mW/cm²
• Charging base with

Technical Specifications :

• Size of main uint: 23mm×23mm×204mm
• Net weight of main unit: 108g
• Applied parts of the equipment: Top of main unit, Point cure lens
• Duty cycle of the equipment: 20 Sec on/20 Sec off
• classified by power supply
• The power supply by the rechargeable battery
• Rechargeable Lithium battery:
• Battery model:18500, Battery capacity: 2000mAh
• Battery has over-voltage, over current and short circuit protection
• Adapter(charge) Input: 100-240V~ 50/60Hz 0.4A Max.
• Ausgang: 5,0V 1A
• The adapter must be complies with IEC 60601-1 and IEC 60601-1-2
• 10W high power
• Wellenlänge: 385nm~515nm
• Class: class 2 AEL: 3.9×10-3J

WIDE-SPECTRUM CURINGL IGHT

ULTIMATE CURING EXPERT

WOODPECKER Curing Light

• 16 years of professional technology
• 38 national patents
• Global sales over 1. 5 million units
• Pioneering Curing Light expert in China

SMAL L BUT POWERFUL

MAKING A BIG DIFFERENCE

• Full- metal body, ergonomically-stre amlined design,
• without tiredness from long-time holding
• 108g main unit,
• light but strong, anti-shock and durable

7 MODES TO FULLY MEET A VARIETY OF CLINICAL NEEDS

• Like an all star, O-Star is strong in performance, well-controlled and can fully meet various clinical needs.
• Normal High Turbo Ortho Soft Pulse Check.

Normal Mode

• Constant light intensity:1000- 1200mw/c㎡.
• Suitable for most treatment scenarios,such as illings, restorations, etc.
• Time setting: 5s, 10s, 15s, 20s.

High Mode

• Constant light intensity:1800-2000 mw/c㎡.
• Suitable for quick curing,ensuring enough curing depth.
• Time setting: 3s, 5s.

Turbo Mode

• Time setting: 1s, 3s.
• 2700-3000mw/c㎡.
• Ultra-high light intensity enables.
• 1 sec curing of 2mm resin.

Ortho Mode

• Time setting: 3s*5, 3s*10.
• 2700- 3000mw/c㎡.
• High light intensity with strong penetrability,especially suitable for orthodontic bracket bonding.

Soft Mode

• Light intensity is gradually increased from 0 to 1200mw/c㎡.
• Time setting: 5s, 10s, 15s, 20s.
• Effectively reduce the shrinkage rate of resin.
• Lower the risk of microleakage.

Pulse Mode

• The LED will stop for 0.4s at an interval of 0.6s curing.
• When working in a cycle of treatment,it can effectively reduce heat generation,efficiently dissipate heat and ensure the comfort of diagnosis and treatment.
• Time setting: 5s, 10s, 15s, 20s.

Check Mode

• This mode outputs a single purple light. When special glasses are worn, the caries are obviously orange-red.
• Application: Detection of caries,calculus and cracked tooth.

UNIFORM BEAM, STRONG PENETRABILITY

More -focused light output thanks to light angle of only 15.8°,ensuring good deep curing effect.

LESS LIGHT LOSS

• The light intensity of Curing Light will be reduced when the curing distance increases.
• Compared to other Curing Lights, 0- Star undergoes less light loss.

LIGHT INTENSITY UP TO 3000 MW/c㎡

• The high light intensity brings sufficient curing depth,which can reduce the curing time and greatly improve the efficiency of resin curing.
• Equipped with 10wL ED.
• Light intensity up to 3000 mw/c㎡,bringing you full confidence in curing.

CHARGING BASE WITH BUILT-IN LIGHT METER

• There is a light meter built in the charging base.
• Accurate light intensity is required for efficient polymerization of the resin,bringing you and your patients the best treatment experience.

360° ROTATABL E HEAD MEETING VARIOUS CLINICAL NEEDS

• 360° rotatable head, easy to iluminate all angles in the mouth
• The low-profile head can easily reach the posterior teeth.
• The patient only needs to open the mouth slightly and enjoy comfortable treatment.

WIDE SPECTRUM CURING LIGHT CAN CURE ALL RESIN MATERIALS ON THE MARKET.

• Camphorone (CQ) is used as photoinitiator in most of the resins on the market,but some resins use two kinds of new photoinitiators, i.e. TPO or ivocerin.
• The main absorption wavelength of these three kinds of resins is 385- 51 5mm.
• With a wavelength range of 385-51 5nm,O-Star is suitable for effective curing of most resins on the market.
• Equipped with OLED screen, the mode,light intensity and time can be clearly displayed to avoid clinical errors.

indicates: This photoinitiator can better absorb light at this wavelength range.

Note: The data comes from the official website of lvoclar Vivadent.

UNPRECEDENTED CURING LIGHT

INCORPORATING VARIOUS STRENGTHS