The features of this product :

• 1) Lithium batteries are replaceable.
• 2) Three operating modes: full power, progressive, pulse.
• 3) Time setting: 5 seconds, 10 seconds, 15 seconds, 20 seconds, 25 seconds, 30 seconds, 35 seconds, 40 seconds.
• 4) Constant optical power output, which will not affect the curing effect due to the decrease of battery power.
• 5) Large capacity battery, fully charged at one time, illuminated for 10 seconds / time, and can be used continuously for more than 400 times.

Product principle and scope of application:

• LED. D light curing machine uses the principle of light radiation to irradiate photosensitive resin to cure it rapidly.
• It is applicable to dentistry and has the function of accelerating the curing of dental repair materials.

Technical specifications:

• Power supply:
• Rechargeable Lithium battery
• Battery model: ICR18490
• Battery voltage and capacity: 3.6V, 1400mAh
• The battery includes over-voltage protection,over-current protection  and short circuit protection.
• Adapter:
• Input: AC100V-240V 50Hz/60Hz
• Output: DC5.0V/1A
• Applied part: Optical fiber
• Light source:  3.3.1 3W high power blue light LED
• Wave length: 385nm-515nm
• Light intensity: 1000mW/cm2 ~1700mW/cm2
• Size: 202mm×32mm×38mm
• Net weight: 143g
• Consume power: ≤8W

Work condition:

• Environment temperature: +5℃~+40℃
• Relative humidity: 30%~75%
• Atmosphere pressure: 70kPa to106kPa

The battery can be replaced.

Three working modes: Full, Ramping, Pulse
Time setting: 5s,10s,15s,20s,25s,30s,35s,40s.

A full charge can be used for over 400 times. (10s/time)
Constant light intensity,the solidification effect is not affected by the consumption of remaining power.

With wire or wireless.
lt can run directly on commercial power supply whilst the battery runs out.